Kuvaus
M2PF-C3
ean: 6954301166399
Specifications:
– Model: M2PF-C3
– Colour: Black
– Material: Aluminum Alloy + ABS Plastic
– Main Control Scheme: for JMicron JMS580
– Output Interface: USB3.1 GEN1 Type-C
– Transmission Rate: 5Gbps
– Support Capacity: Up To 2TB
– Installation Method: Tool-Free Installation of Hard Disk, Housing Lock Screw Fixed
– Compatibly Support 4 different specifications M.2 NGFF SSD: 2230, 2242, 2260, 2280
– Support System: for Windows/MAC OS/ Linux
– Data Cable: USB Type-A to Type-C, 0.15m (included)
Feature:
Using for JMicron JMS580 high-end master control solution, external USB3.1 Type-C output interface, can support up to 5Gbps transmission rate.
The body is made of ABS material, and the top is covered with a metal heat sink to enhance heat dissipation and protect the inner core.
Support smart hibernation technology, 10-minute preset, energy saving and environmental protection, reduce hard disk heating, and ensure hard disk safety.
Compatibly Support 4 different specifications M.2 NGFF SSD: 2230, 2242, 2260, 2280.
Features:
Supports TRIM to the SSD
Integrates with USB Type-C multiplexer& configuration channel(CC)logic
Complies with PCI Express Base Specification Revision 3.1a
Complies with NVM Express 1.3
Complies with USB3.1 Gen 1 and Gen 2 Specification,USB Mass Storage Class,Bulk-only Transport Specification(Revision 1.0)
Complies with USB Attached SCSI Protocol(UASP)Specification(Revision 4)
Supports USB Super-Speed/High-Speed/Full-Speed Operation
Supports USB2.0/USB3.1 Gen 1/2 power saving mode
Supports external SPI NVRAM for Vendor VID/PID of USB2.0/USB3.1 Gen 1/2 device controller
Thirteen GPIOs for customization
Provides hardware controlled PWMs
Provides software utilities for downloading the upgraded firmware code under USB2.0/USB3.1 Gen1,2
Design for Windows 7,Windows 10 and MAC 10.10.5 or later version
Supports 25MHZ external crystal
Supports 3.3V I/O
Embedded 5V to 1.0V voltage regulator
Embedded 5V to 3.3V linear voltage regulator(LD0)
Arviot
Tuotearvioita ei vielä ole.